|
|
I would climb to 1000 ft and level off until temp came down to 220--I would climb 500 ft and have to level off again to bring temps down--at the same time the cylinders were very hot--If I had known that the servo was the real problem I would have done that first and then seen the effect on the oil temp. Once I got to altitude the cylinder temps were 410 to 435 and the smallest of climbs the temps would go right up. Paul Hershorion
From: "Zavatson, Christopher J \(US SSA\)" <Christopher.Zavatson@baesystems.com>
Date: 2007/03/01 Thu PM 09:12:37 EST
To: lml@lancaironline.net
Subject: [LML] Re: 360 over heating problems resolved
Paul,
<<1. My oil temps ran 250+ (red line) until I did the following--I put
a naca scoop in the center of my top cowling with a 3 inch flex tube to
the oil cooler and closed the 3 inch hole behind # 3 cylinder. My temps
now are 185 to 190.>>
What impact did fix number 1 have on CHTs in cruise for the various
cylinders (@ full throttle and leaned for best power)? Chris
Chris Zavatson
N91CZ
360std
www.N91CZ.com
--
For archives and unsub http://mail.lancaironline.net/lists/lml/
|
|