X-Virus-Scanned: clean according to Sophos on Logan.com X-SpamCatcher-Score: 1 [X] Return-Path: Sender: To: lml Date: Fri, 16 Feb 2007 09:52:18 -0500 Message-ID: X-Original-Return-Path: Received: from imo-d23.mx.aol.com ([205.188.139.137] verified) by logan.com (CommuniGate Pro SMTP 5.1.6) with ESMTP id 1841567 for lml@lancaironline.net; Fri, 16 Feb 2007 07:07:18 -0500 Received-SPF: pass receiver=logan.com; client-ip=205.188.139.137; envelope-from=PJHWFD@aol.com Received: from PJHWFD@aol.com by imo-d23.mx.aol.com (mail_out_v38_r7.6.) id q.cac.b0a56a0 (42808) for ; Fri, 16 Feb 2007 07:06:18 -0500 (EST) From: PJHWFD@aol.com X-Original-Message-ID: X-Original-Date: Fri, 16 Feb 2007 07:06:17 EST Subject: Re: [LML] Air/oil separators X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="-----------------------------1171627577" X-Mailer: 9.0 for Windows sub 5127 X-Spam-Flag: NO -------------------------------1171627577 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit I am using the Andair separator mounted to the left side accessory pad cover. I fabricated an angle bracket from aluminum and drain back into a hex fitting directly below. this allow for the highest location for drainback. It works well but breather tube location and design took some experimenting to solve a siphoning problem. Keep the end out of the slipstream. I used a piece of straight aluminum tubing attached to the firewall. Place some vent holes to break any siphoning force. Peter Hebert N23PH LEG2/G pjhwfd@aol.com -------------------------------1171627577 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable I am using the Andair separator mounted to the left side accessory pad co= ver. I fabricated an angle bracket from aluminum and drain back into a=20= hex fitting directly below. this allow for the highest location for dr= ainback. It works well but breather tube location and design took some exper= imenting to solve a siphoning problem. Keep the end out of the slipstr= eam. I used a piece of straight aluminum tubing attached to the firewa= ll. Place some vent holes to break any siphoning force.=20

Peter Hebert
N23PH LEG2/G
pjhwfd@aol.com

-------------------------------1171627577--