A three-ply, polyamide-fabricbraid-polyamide, flexible tube with factory installed 400 or 300 Series stainless
steel tips.
Used in systems where high pressure flexible connections are needed to facilitate frequent make and break operations,
allow individual movement of components under pressure and/or withstand high frequency vibration.
Weather Inert to ozone and ultraviolet. Safety Burst pressure of 20 000 psi for a 3:1 margin with operating pressure.
Aging Negligible humidity absorption. Growth Less than 5% physical change overall at maximum operating pressure.
Flexibility Bending radius of 15/16 in. at maximum operating pressure. Chemical Resistance Compatible with an
extremely wide range of liquid and gas media.
Lightweight - Tube weight is only 0.5 oz/yd of length (16 g/m).
Working Pressure - Up to 6 000 psi (41 MPa).
Flexibility - Bending radius of 15/16 in. (2.4 cm) at maximum operating pressure.
Temperature - No derating of operating pressure for temperatures from -30 to 100 °F (-34 to 38 °C).
Weather - Inert to ozone and ultraviolet
Safety - Burst pressure of 20 000 psi (138 MPa) for a 3.3 margin with operating pressure.
Aging - Negligible humidity absorption
Growth - Less than 5% physical change overall at maximum operating pressure
Chemical Resistance - Compatible with an extremely wide range of liquid and gas media
I spoke to Tim at Lancair, he said that they do not currently sell the DH
lines and that they are are very nice to use and compact.
They are expensive…on the order of $500-$600 probably for a set of lines for
the legacy.
If at lease five people are interested in ordering a set, he will do the
engineering and put a package together for the Legacy.
I'm in for one.
Kevin Kossi
Legacy 73%
New York