|
|
Randy,
I would not use the "standard" ignition switch at all.
You want drop dead reliability on any ignition system. Having the ignition
powered through the key switch requires the master switch to be on to have
ignition capability. There may be situations where you will need that
ignition to work when the master is off. (various electrical failures, etc)
I had my Electroair system powered with a wire to the positive battery
terminal with one very reliable switch on that wire.
Mark Ravinski
N360KB 1396 hrs
----- Original Message ----- From: "Marvin Kaye" <marv@lancaironline.net>
To: <lml>
Sent: Tuesday, December 19, 2006 1:43 AM
Subject: [LML] Re: Electroair Connetion
Posted for "Randy Stuart" <randystuart@hotmail.com>:
Does anyone know how to connect an Electroair ignition to a standard TCM
ignition switch??
Thanks..
Randy Stuart
LNC2
--
For archives and unsub http://mail.lancaironline.net/lists/lml/
|
|