Sender: <marv@lancaironline.net>
To: lml
Date: Sat, 26 Aug 2006 15:17:10 -0400
Message-ID: <redirect-1350039@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=209.225.28.212; envelope-from=rpharis@teamimc.com
From: "Rod Pharis" <rpharis@teamimc.com>
Subject: RE: [LML] Inside Primer/Coating
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Importance: Normal
In-Reply-To: <list-1349780@logan.com>

Kevin,

Absorbent CF in the vicinity of hydraulic lines and fittings could be
weakened by leaking hydraulic fluid.  Therefore, the CF in those areas
should be sealed as a preventive measure.  If it can happen it will, sooner
or later.

Rod

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net]On Behalf Of
Kevin Kossi
Sent: Saturday, August 26, 2006 7:49 AM
To: Lancair Mailing List
Subject: [LML] Inside Primer/Coating


Is there any reason to coat or prime the inside areas of the plane. I
am ready to start installing the lines?

I plan to coat the wheel wells with tank sealer, but the rest seams
like a waste of added weight.


Kevin
Legacy


--
For archives and unsub http://mail.lancaironline.net/lists/lml/