Sender: <marv@lancaironline.net>
To: lml
Date: Tue, 22 Aug 2006 19:35:42 -0400
Message-ID: <redirect-1343691@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=209.86.89.61; envelope-from=douglasbrunner@earthlink.net
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=dk20050327; d=earthlink.net;
  b=SGIXi2HTfy33MsmNyho8Gri9gT5WXiUAyUcbKxgMR7ZIf7fS09g02i25ZSNCNUm6;
  h=Received:Message-ID:From:To:References:Subject:Date:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Priority:X-MSMail-Priority:X-Mailer:X-MimeOLE:X-ELNK-Trace:X-Originating-IP;
From: "Douglas Brunner" <douglasbrunner@earthlink.net>
References: <list-1343519@logan.com>
Subject: Re: [LML] Removable Stick - Legacy
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit

I am also interested in a removable stick.

The owner of Avionics Systems in Virginia http://www.avionikits.com/ told me
that he has done removable sticks.  Suggest you talk to him.

D. Brunner

----- Original Message ----- 
From: "Alan K. Adamson" <aadamson@highrf.com>
To: "Lancair Mailing List" <lml@lancaironline.net>
Sent: Tuesday, August 22, 2006 6:04 PM
Subject: [LML] Removable Stick - Legacy


> Anyone done a removable stick on the copilot side of their Legacy?  I'm
> wanting to do that.  The challenge seems to be that the stick bends
> immediately above the upper pivot bolt.  It then has a nice S curve in it
> before it's gets straight again.
>
> I'm thinking perhaps the way to do this is just to bite the bullet and buy
> another stick and cut it off at the upper pivot, then to swap sticks, 
> would
> require to swap pivot assemblies...
>
> Thots or examples appreciated?
>
> Alan
>
>
> --
> For archives and unsub http://mail.lancaironline.net/lists/lml/