Return-Path: <marv@lancaironline.net>
Received: from [69.171.58.236] (account marv@lancaironline.net)
  by logan.com (CommuniGate Pro WEBUSER 5.1c.3)
  with HTTP id 1342179 for lml@lancaironline.net; Tue, 22 Aug 2006 00:11:58 -0400
From: "Marvin Kaye" <marv@lancaironline.net>
Subject: Re: [LML] Re: Making epoxy joints - peel-ply
To: lml
X-Mailer: CommuniGate Pro WebUser v5.1c.3
Date: Tue, 22 Aug 2006 00:11:58 -0400
Message-ID: <web-1342179@logan.com>
In-Reply-To: <8A2C4A02-AFF2-4801-BA4C-F7A983B38CA5@airforcemechanical.com>
References: <list-1340744@logan.com>
 <8A2C4A02-AFF2-4801-BA4C-F7A983B38CA5@airforcemechanical.com>
MIME-Version: 1.0
Content-Type: text/plain;charset="iso-8859-1";format="flowed"
Content-Transfer-Encoding: 8bit



Posted for Kevin Kossi <kevin@airforcemechanical.com>:

  I do what Marv does, but in the case where the joint is visible I  usually
end up sanding it anyway if there are any imperfections that  stick up, or the
area under where the Peel-Ply was is not perfectly  smooth.
  
  
  Kevin