Return-Path: Received: from cdihost.cdicorp.com ([207.79.152.5]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35) with SMTP id com for ; Mon, 25 Oct 1999 06:51:56 -0400 Received: from JUPITER by cdihost.cdicorp.com via smtpd (for olsusa.com [205.245.9.2]) with SMTP; 25 Oct 1999 10:56:08 UT Received: from cdim-pts-mail.cdicorp.com (CDIM-PTS-MAIL [172.17.131.3]) by jupiter.cdicorp.com with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2448.0) id VN4BV14S; Mon, 25 Oct 1999 06:56:07 -0400 Received: by CDIM-PTS-MAIL with Internet Mail Service (5.5.2448.0) id ; Mon, 25 Oct 1999 06:53:41 -0400 Message-ID: From: "Rumburg, William" To: "'harrelson@erols.com'" , lancair.list@olsusa.com Subject: RE: duct tape residue Date: Mon, 25 Oct 1999 06:53:41 -0400 X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> > I see that a lot of you did what I did, ie: put duct tape > around the edges of the glass on you're canopy to keep the protective > layer from peeling up. Now that I've removed the duct tape, I'm left > with some gooey residue from the duct tape on the plexiglass. Alcohol > doesn't get it off, I'm afraid to use acitone on the plexiglass and my > fingernails are worn off. What works?? > Bill - Try DuPont "Prep-Sol 3919". It's available in any full range paint store. It's used primarily for clean up prior to priming and painting, but is a safe, all-around petroleum-based solvent. I use it often...especially for hydraulic fluid. Bill Rumburg N403WR (Sonic bOOm) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html