From: RWolf99@aol.com
Message-ID: <102.e89f086.296a1445@aol.com>
Date: Sun, 6 Jan 2002 15:57:41 EST
Subject: Re: Sticky Stuff Dispenser
To: lancair.list@olsusa.com
MIME-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Reply-To: lancair.list@olsusa.com

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
In a message dated 1/5/2002 10:42:58 PM Mountain Standard Time, Steve Colwell 
writes:

<< A good quality electronic scale with a tare feature to zero the scale with
 your mixing cup on it is available for about $100.00 or so.  I keep a sheet
 of 1 mil plastic over mine to keep the dribbles off and dispense the resin
 and hardener from ...>>

Steve is right.  This method is really easy, accurate and usable with any 
resin, sealer, or structural adhesive.  Try getting Hysol through your 
sticky-stuff dispenser!

You do, in fact, need to have a small mouth bottle to dispense the goop into 
your mixing cup.  It's nothing but frustration to pour it out of a metal 
one-gallon can.

I've been using the Jeffco with a 25:100 by weight mixture.  I can do that 
math in my head (let's see ... 40 grams of resin means 10 grams of 
hardener...)  The Shell-TETA system was harder with an 18.5 to 100 ratio (or 
something like that) -- I had to have a calculator by the scale.  Same goes 
for Hysol with it's oddball mixture ratio.

I wasn't as smart as Steve -- I didn't have the sheet of Saran Wrap over my 
scale and I now have a sticky, messy scale ... but it still works!

- Rob Wolf
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>