Mailing List lml@lancaironline.net Message #334
From: Steve & Claudette Colwell <colwell@innercite.com>
Subject: Re: Sticky Stuff Dispenser
Date: Sat, 5 Jan 2002 09:36:10 -0800
To: <lancair.list@olsusa.com>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

My sticky stuff dispenser worked fine with the Saf-T-Poxy II, was nothing
but trouble with Jeffco.  I switched to a digital gram scale which can also
be used for West  System, Hysol and premixed micro.  Works great and is
accurate within 1/10 of a gram.  I always wondered about the accuracy of the
sticky stuff dispenser pumping bubbles, resin side starting first, check
valve problems, etc..

A good quality electronic scale with a tare feature to zero the scale with
your mixing cup on it is available for about $100.00 or so.  I keep a sheet
of 1 mil plastic over mine to keep the dribbles off and dispense the resin
and hardener from about 10 oz sealable Rubbermade ketchup dispensers.

Steve Colwell   Legacy 2K  Placerville,CA   (530) 621-3408


LML website:   http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.

Please send your photos and drawings to marvkaye@olsusa.com.

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster