Message-ID: <379FB986.D8EB1A6B@mr.net>
Date: Wed, 28 Jul 1999 21:16:38 -0500
From: Michael D Smith <msmith1@mr.net>
To: "lancair.list@olsusa.com" <lancair.list@olsusa.com>
Subject: Brake Tool 
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
I recently changed out the Nylaflow for DH lines on my 4.

I made a tool to handle the fitting inside the axle
assembly.   Basically it is a 7/16 socket that I cut a slot
for clearing the brake line.  It is extended with a 1/2"
pipe nipple and a nut on the other end that is TIG welded.
It's not a big deal, but if any of you need it, I would be
glad to send it out, just as long as you send it back when
you are through with it.  It might save you some fooling
around and get on to the business of project completion.
This is one of those "I hope I never have to use again..."
kinda tools.

MDS

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML homepage:   http://www.olsusa.com/Users/Mkaye/maillist.html