From: "Marvin Kaye" <marv@lancaironline.net>
Subject: Re: [LML] Infinity stick grip
To: lml
Date: Wed, 08 Jun 2005 13:32:19 -0400
Message-ID: <web-988613@logan.com>
In-Reply-To: <20050608014050.66914.qmail@web80510.mail.yahoo.com>
References: <20050608014050.66914.qmail@web80510.mail.yahoo.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"; format="flowed"
Content-Transfer-Encoding: 8bit

Posted for Tammy and Mike Salzman <arrow54t@yahoo.com>:

  Steve,
  
  Looking at the photo, it looks like you did not drill the hole through
  the stick.  The part that fits the bushing hole should also penetrate
  the stick.  This will make it impossible to rotate or pull off the
  stick grip from the stick.  I followed some others idea to drill the
  hole about 15 degrees rotated inboard to make the stick grip fit the
  hand position better.  If you hold your hand relaxed as it would be
  resting on the grip, you should notice that your fingers are angled in
  slightly. Photos upon request.  I would have to search through my
  archive to find them.
  
  I would like to add that cutting a slot in the top of the tubing of the
  stick will help with routing the wiring down and out the grip.  Make
  the slot in the stick to match the location of the slot in the
  spacer/bushing.
  
  Mike Salzman
Fairfield, CA
  LNCE