Return-Path: Sender: "Marvin Kaye" To: lml@lancaironline.net Date: Sat, 16 Oct 2004 09:03:30 -0400 Message-ID: X-Original-Return-Path: Received: from imo-m25.mx.aol.com ([64.12.137.6] verified) by logan.com (CommuniGate Pro SMTP 4.2.5) with ESMTP id 475164 for lml@lancaironline.net; Sat, 16 Oct 2004 08:23:36 -0400 Received-SPF: pass receiver=logan.com; client-ip=64.12.137.6; envelope-from=MikeEasley@aol.com Received: from MikeEasley@aol.com by imo-m25.mx.aol.com (mail_out_v37_r3.8.) id q.fc.433943b (4418) for ; Sat, 16 Oct 2004 08:23:03 -0400 (EDT) From: MikeEasley@aol.com X-Original-Message-ID: X-Original-Date: Sat, 16 Oct 2004 08:23:03 EDT Subject: Re: [LML] Re: molds cheap and easy X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="-----------------------------1097929383" X-Mailer: 9.0 for Windows sub 5115 -------------------------------1097929383 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit I think packing tape, Saran Wrap, duct tape, etc. are great if you don't need a perfectly smooth part. Some of my molds, the "good" side is the "mold" side. I want them to be as smooth as possible. Some things get covered with 1/4" foam and then leather, so small imperfections will disappear. But I have some magazine pockets that need to be smooth. I don't want to spend hours doing body work on the part after it comes out of the mold. Thanks again for all the good ideas. Mike -------------------------------1097929383 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable

I think packing tape, Saran Wrap, duct tape, etc. are great if you don'= t need a perfectly smooth part. Some of my molds, the "good" side is t= he "mold" side. I want them to be as smooth as possible. Some th= ings get covered with 1/4" foam and then leather, so small imperfections wil= l disappear. But I have some magazine pockets that need to be smooth.&= nbsp; I don't want to spend hours doing body work on the part after it comes= out of the mold.

Thanks again for all the good ideas.

Mike

-------------------------------1097929383--