|
|
Hi Kai, thanks for your note. Pic's are more than welcome!
Cheers
Doug
ETLTYT@aol.com 13/10/2004 9:19:54 pm >>>
Hi Doug,
As recommended by Ross Connell many years ago to me I
built a small (approx 2 inch by 3/4 inch channel that runs from the outboard
bay to the (now) middle one ) out of 3 bid and glassed it in place between the 2
ribs. This obviously is on the bottom and on the top I glased in a 3/4 inch
aluminum tube as a vent. Also I did encase the bellcranck nuts on the outboard fuel bay side. I
am not yet flying (am worlds slowest builder) but fuel tanks passed the
balloon test. If you like when I get home this weekend I can E-mail you picture of mods. Let me know. Kai Ogston
|
|