Return-Path: Sender: "Marvin Kaye" To: lml@lancaironline.net Date: Fri, 01 Oct 2004 09:27:44 -0400 Message-ID: X-Original-Return-Path: Received: from imo-m24.mx.aol.com ([64.12.137.5] verified) by logan.com (CommuniGate Pro SMTP 4.2.3) with ESMTP id 439285 for lml@lancaironline.net; Fri, 01 Oct 2004 08:59:19 -0400 Received-SPF: pass receiver=logan.com; client-ip=64.12.137.5; envelope-from=MikeEasley@aol.com Received: from MikeEasley@aol.com by imo-m24.mx.aol.com (mail_out_v37_r3.7.) id q.b9.476bf0c7 (4214) for ; Fri, 1 Oct 2004 08:58:37 -0400 (EDT) From: MikeEasley@aol.com X-Original-Message-ID: X-Original-Date: Fri, 1 Oct 2004 08:58:37 EDT Subject: Re: [LML] Bonding wing panels/Legacy missing wing panel X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="-----------------------------1096635517" X-Mailer: 9.0 for Windows sub 5113 -------------------------------1096635517 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Dan, At the factory we spread pure Hysol on the bonding areas then scraped it back off with a bondo squeegee, leaving a thin film of pure Hysol. We used the scraper because the painted on layer was way too thick due to the viscosity of the Hysol. Then we mixed the Hysol with flox. We painted pure Jeffco on the bonding areas before applying the Jeffco/flox. Mike -------------------------------1096635517 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable

Dan,

At the factory we spread pure Hysol on the bonding areas then scraped i= t back off with a bondo squeegee, leaving a thin film of pure Hysol. W= e used the scraper because the painted on layer was way too thick due to the= viscosity of the Hysol. Then we mixed the Hysol with flox.

We painted pure Jeffco on the bonding areas before applying the Jeffco/= flox.

Mike

-------------------------------1096635517--