Return-Path: Sender: (Marvin Kaye) To: lml@lancaironline.net Date: Wed, 01 Oct 2003 13:07:16 -0400 Message-ID: X-Original-Return-Path: Received: from mailnw.centurytel.net ([209.206.160.237] verified) by logan.com (CommuniGate Pro SMTP 4.1.4) with ESMTP id 2610536 for lml@lancaironline.net; Wed, 01 Oct 2003 10:57:11 -0400 Received: from Downstairs (pppoe2417.gh.centurytel.net [64.91.55.172]) by mailnw.centurytel.net (8.12.10/8.12.10) with SMTP id h91Ev56r011801 for ; Wed, 1 Oct 2003 07:57:06 -0700 (PDT) X-Original-Message-ID: <003401c3882c$44dbf430$0100a8c0@Downstairs> From: "Robert Smiley" X-Original-To: "Lancair Mailing List" References: Subject: Re: [LML] Rudder gust lock X-Original-Date: Wed, 1 Oct 2003 07:57:00 -0700 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0031_01C387F1.9830D0F0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 This is a multi-part message in MIME format. ------=_NextPart_000_0031_01C387F1.9830D0F0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Buy one of those "Remove Before Use" red flags, get two aluminum tubes = about 5/16 inch OD. make four pieces of fuel tubing about two inches = long. =20 slip the tail of the flag between the rudder counterweight and the = vertical stab, mark two holes on the tail by each side of the stab. = Poke holes at that point for the aluminum tubing, insert the aluminum = tubing and slip the fuel line over the tubing on each side of the tail. = WA LA you have a very light clamp that rolls up and can be stowed away = in a plastic baggy. I do the same thing for the elevator. For the ailerons, I use a rubber snubber with the metal hooks on each = end, hook one end over the throttle knob, wrap it around the control = stick with one turn and return the other end and hook it onto the = throttle again. Good Luck. Bob Smiley N94RJ ------=_NextPart_000_0031_01C387F1.9830D0F0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Buy one of those "Remove Before Use" = red flags, get=20 two aluminum tubes about 5/16 inch OD. make four pieces of fuel tubing = about two=20 inches long. 
 
slip the tail of the flag between the = rudder=20 counterweight and the vertical stab, mark two holes on the tail by each = side of=20 the stab.  Poke holes at that point for the aluminum tubing, insert = the=20 aluminum tubing and slip the fuel line over the tubing on each side of = the tail.=20 WA LA you have a very light clamp that rolls up and can be stowed away = in a=20 plastic baggy.
 
 
I do the same thing for the =20 elevator.
 
For the ailerons, I use a rubber = snubber with the=20 metal hooks on each end, hook one end over the throttle knob, wrap it = around the=20 control stick with one turn and return the other end and hook it onto = the=20 throttle again.
 
Good Luck.
 
Bob Smiley
N94RJ
------=_NextPart_000_0031_01C387F1.9830D0F0--