Return-Path: Sender: (Marvin Kaye) To: lml Date: Mon, 14 Apr 2003 20:21:12 -0400 Message-ID: X-Original-Return-Path: Received: from smtp01.wlv.untd.com ([209.247.163.57] verified) by logan.com (CommuniGate Pro SMTP 4.1b3) with SMTP id 2122791 for lml@lancaironline.net; Mon, 14 Apr 2003 20:09:46 -0400 Received: (qmail 12591 invoked from network); 15 Apr 2003 00:09:43 -0000 Received: from dialup-209.244.79.96.dial1.denver1.level3.net (HELO gl) (209.244.79.96) by smtp01.wlv.untd.com with SMTP; 15 Apr 2003 00:09:43 -0000 From: "glong2" X-Original-To: "Lancair on line" Subject: Questions about ES assembly X-Original-Date: Mon, 14 Apr 2003 18:09:23 -0600 X-Original-Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 I have a couple of questions for people flying/building ES's. I tried contacting the factory in Redmond, but they seem too busy to answer questions since Carsten has left! 1. Where did you install an outside air temp sensor and how does it work? 2. I purchased the additional bottom door latches for the ES and Vern thought that both sets of latches ( bottom & side) were installed in the door. I looked at the drawings and it seems to me the actuating mechanisms interfere. Has anyone installed both on the ES door? 3. Is there any more information for the air box on the IO-550? I would like to install one sooner rather than later! 4. A while back there was talk about an inertial reel seat belt system for the ES's. I tried to make some contacts but did not get a delivery or cost quote. Did anyone have any better luck? Thanks for any input, Eugene Long Lancair Super ES glong2@netzero.net