Posted for rickschrameck <rickschrameck@lvcm.com>:

Don,
    Block down the Euro Prime until you see carbon on the high spots then re prime or use metal glaze over the Euro VERY sparingly then block and re prime the spot work.  If you worked your way up the grit range you will have no scratch problems that Euro will nor cover.  You will never get rid of the weave print through if you are doing it light and right.  The weave will only re appear after a year or two.  Mine is just showing some weave on the candy.  If you have enough clear on the plane you just re color sand and buff,  the print is gone.  Stay away from Aero Poxy it is junk.

Good Luck,

Rick Schrameck
Legacy 123