<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

Hi All

I looked at what the manual says regarding drilling a hole to let the rudder
cable guide through the load transfer pads.

I have a different idea, If I cut a slot into the closeout rib and install
the tubing into the slot with micro and the glass the two layers back and
then do the load transfer pads I can have a smooth flus fitting joint.

Any ideas or suggestions.???

Pine Pienaar
pine@cpro.co.za
Lancair 360 #664