Return-Path: Sender: (Marvin Kaye) To: lml Date: Sun, 08 Sep 2002 18:28:45 -0400 Message-ID: X-Original-Return-Path: Received: from imo-d09.mx.aol.com ([205.188.157.41] verified) by logan.com (CommuniGate Pro SMTP 4.0b7) with ESMTP id 1723877 for lml@lancaironline.net; Sun, 08 Sep 2002 11:38:42 -0400 Received: from Billhogarty@aol.com by imo-d09.mx.aol.com (mail_out_v34.10.) id q.a2.2b653d3f (16633) for ; Sun, 8 Sep 2002 11:38:37 -0400 (EDT) From: Billhogarty@aol.com X-Original-Message-ID: X-Original-Date: Sun, 8 Sep 2002 11:38:37 EDT Subject: Re: [LML] wire gage size and shielding X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_a2.2b653d3f.2aacc8fd_boundary" X-Mailer: AOL 7.0 for Windows US sub 10513 --part1_a2.2b653d3f.2aacc8fd_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit RE: Fuel Probes Gary Casey mentioned the problem with the crude design of fuel probes - There was a suggestion some time ago, to use a 12 VDC regulator in the power supply for the fuel probes to eliminate one source of problems. I noticed yesterday that, even tho my hydraulics and my fuel probes originate from different circuits ( and circuit breakers), both fuel gages rise to full whenever the hydraulic pump cycles. I believe that the recommendation was to use an Archer 276-1771 voltage regulator to isolate the circuits and to provide a constant voltage source to the probes. I'll comment again after I install the regulator. Regards, Bill Hogarty L-IVP @ 95% --part1_a2.2b653d3f.2aacc8fd_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit RE: Fuel Probes

Gary Casey mentioned the problem with the crude design of fuel probes -

There was a suggestion some time ago, to use a 12 VDC regulator in the power supply for the fuel probes to eliminate one source of problems.

I noticed yesterday that, even tho my hydraulics and my fuel probes originate from different circuits ( and circuit breakers), both fuel gages rise to full whenever the hydraulic pump cycles.

I believe that the recommendation was to use an Archer 276-1771 voltage regulator to isolate the circuits and to provide a constant voltage source to the probes. I'll comment again after I install the regulator. Regards, Bill Hogarty L-IVP @ 95%

--part1_a2.2b653d3f.2aacc8fd_boundary--