On my 235/320 I found that the aluminum sleeves or spacers that the factory
sent with the kit that are used between the hydrolic ram and the rod ends
enableing the rams to bottom out
(gear up position) on themselves rather than on the landing gear mechanisms
to be too short.

Rather than use washers that could bind up I had a friend who is a machinist
make up some longer ones that worked great.

They are $10

If anyone else is interested let me know and I will get them made for you.

I sincerely hope this doesn't start another month long argument about
"Sleeves with washers vs. sleeves without washers"



Randy Snarr
235/320 69%
801 865 3600