Return-Path: Sender: (Marvin Kaye) To: lml Date: Wed, 26 Jun 2002 11:30:35 -0400 Message-ID: X-Original-Return-Path: Received: from www.dynacomm.ws ([198.22.63.66] verified) by logan.com (CommuniGate Pro SMTP 4.0b4) with ESMTP id 1513596 for lml@lancaironline.net; Wed, 26 Jun 2002 08:30:46 -0400 Received: from [10.0.1.201] (216-234-105-9.ded.det2.hexcom.net [216.234.105.9]) (authenticated) by www.dynacomm.ws (8.10.2/8.10.2) with ESMTP id g5QCUiT13629 for ; Wed, 26 Jun 2002 08:30:44 -0400 Mime-Version: 1.0 X-Sender: lorn@pop.dynacomm.ws X-Original-Message-Id: In-Reply-To: References: X-Original-Date: Wed, 26 Jun 2002 08:30:42 -0400 X-Original-To: (Lancair Mailing List) From: "Lorn H. Olsen" Subject: [LML] Re: Oversize Piano Hinge Pin Vendors? Content-Type: multipart/alternative; boundary="============_-1187027850==_ma============" --============_-1187027850==_ma============ Content-Type: text/plain; charset="us-ascii" ; format="flowed" >My aileron hinges are getting a little loose. >. >. >Larry Henney >360LH The following letter came from Scott Krueger about 3 years ago. I checked the part number and it is still valid but the price has jumped up to $0.19/ft. The web sight is: http://www.mcmaster.com/. >>From: Sky2high@aol.com >>Date: Thu, 27 May 1999 08:52:21 EDT >>Subject: Teflon/Stainles Steel Hinge Pins >> >>The following is the text copied from a forwarded e-mail circulated in the >>COZY group: >> >><<>approximately $0.18/ foot minimum 5' lengths. Part number 5335K17 Page >>45 Catalog 103. Run a piece of 1/16 stainless steel TIG wire through it >>(I used 420 but 300 series should be okay also) and volia - teflon >>covered hinge pins. McMaster Carr accepts MC, VISA, AE, and they have a >>web site also. TIG wire? Try the local welding shops & supply houses - >>get a pound and share the extra (and there will be a bunch) with your >>flying buddies. >> >>Just trying to reduce the cost of building & flying. >> >>Steve Sharp >>cozyiii@earthlink.net>>> >> >>Scott Krueger >>N92EX -- Lorn H. 'Feathers' Olsen, MAA, DynaComm, Corp. 248-478-4301, mailto:lorn@dynacomm.ws LNC2, O-320-D1F, N31161, Y47, SE Michigan --============_-1187027850==_ma============ Content-Type: text/html; charset="us-ascii" [LML] Re: Oversize Piano Hinge Pin Vendors?
My aileron hinges are getting a little loose.
.
.
Larry Henney
360LH

The following letter came from Scott Krueger about 3 years ago. I checked the part number and it is still valid but the price has jumped up to $0.19/ft. The web sight is: http://www.mcmaster.com/.

From: Sky2high@aol.com
Date: Thu, 27 May 1999 08:52:21 EDT
Subject: Teflon/Stainles Steel Hinge Pins

The following is the text copied from a forwarded e-mail circulated in the
COZY group:

<<<McMaster Carr has teflon spaghetti tubing 0.090 O.D. X 0.066 I.D for
approximately $0.18/ foot minimum 5' lengths. Part number 5335K17 Page
45 Catalog 103. Run a piece of 1/16 stainless steel TIG wire through it
(I used 420 but 300 series should be okay also) and volia - teflon
covered hinge pins. McMaster Carr accepts MC, VISA, AE, and they have a
web site also.  TIG wire? Try the local welding shops & supply houses -
get a pound and share the extra (and there will be a bunch) with your
flying buddies.

Just trying to reduce the cost of building & flying.

Steve Sharp
cozyiii@earthlink.net>>>

Scott Krueger
N92EX
--
Lorn H. 'Feathers' Olsen, MAA, DynaComm, Corp.
248-478-4301, mailto:lorn@dynacomm.ws
LNC2, O-320-D1F, N31161, Y47, SE Michigan
--============_-1187027850==_ma============--