Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.5) with ESMTP id 971608 for rob@logan.com; Sun, 16 Dec 2001 05:11:53 -0500 Received: from hotmail.com ([64.4.18.22]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71866U8000L800S0V35) with ESMTP id com for ; Sat, 15 Dec 2001 15:01:59 -0500 Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sat, 15 Dec 2001 12:02:29 -0800 Reply-To: "Ron Laughlin" Reply-To: lancair.list@olsusa.com From: "Ron Laughlin" To: "AP Pienaar" , References: <000e01c18590$e526e1c0$12c121c4@pine> Subject: Re: LNC2 Elevator gap Date: Sat, 15 Dec 2001 14:02:40 -0600 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-ID: X-Mailing-List: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> > Can anyone tell me what gap I should aim for between the elevator and H-stab > during construction so that its still within spec after painting. Pine, On my Legacy the instruction manual calls for 1.2 mm (.05 in.) gap prior to final paint. I would assume it's the same on the 360. Tongue depressor (mixing stick) is roughly this thickness. Ron Laughlin L2K #56 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://members.olsusa.com/mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please remember that purchases from the Builders' Bookstore assist with the management of the LML. Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>