Message-Id: <5.1.0.14.2.20011210104948.028917c0@pop3.olsusa.com>
Date: Mon, 10 Dec 2001 10:51:00 -0500
To: lancair.list@olsusa.com
From: Marvin Kaye <marvkaye@olsusa.com>
Subject: L320 - nose wheel shimmy cracks engine mount?
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Reply-To: lancair.list@olsusa.com

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Posted for Ietc1@aol.com:

I also had a serious shimmy problem which would only present itself on
occasion.  I also tried all the techniques in trouble shooting the problem to
no avail.  After inspecting the crossover bar just above the nose gear I
noticed it was starting to crack at the weldments.
I removed the engine and had the motor mount rewelded with gussets in place
for added strength.  (I would definitely do this again).  I thought this was
the cause of the problem not the effect.  So I reinstalled the nose gear as
is.
About 20 hrs later after a landing (a soft one I remember well) the nose gear
lost all its fluid.  This is an awful feeling since you know how close the
prop is to ground at that point.  One of the bolts on the front of the strut
had actually sheared.
Once the strut was rebuilt it has worked trouble free since.
Stuart Featherstone - N62SL & N54NE

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>