<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

We talked about proper torquing of fasteners some time back and I mentioned that you should have your torque wrench(s) calibrated. I had also mentioned that I knew of at least one place where you could
get it done, at John Shwaner's Sacramento Skyranch. I guess Mr. Schwaner reads the LML because I got the following email from him
with the information regarding calibration, what it costs, etc.
He also refers to the oil and fuel hoses I purchased from him for my Lancair. ***********************

Torque wrench calibration up to 150 lb. ft. is $24.95 and includes adjustment.
If the torque wrench cannot be calibrated because it requires repair then
it is shipped back no-charge

Thankyou for th enice comment regarding the hoses


John Schwaner
President

Sacramento Sky Ranch Inc.
6622 Freeport Blvd.
Sacramento, CA. 95822
916-421-7672
Fax 916-421-5719
john@sacskyranch.com

********************************

Dan Schaefer


____________________________________________________________________
Get free e-mail and a permanent address at http://www.netaddress.com/?N=1