From: RicArgente@cs.com
Message-ID: <44.ba435f3.27cd2c02@cs.com>
Date: Tue, 27 Feb 2001 11:12:50 EST
Subject: Re: Lights on - VisionMicro OFF
To: lancair.list@olsusa.com
CC: LFrantz@compuserve.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
In a message dated 02/27/2001 9:18:31 AM Eastern Standard Time, 
LFrantz@compuserve.com writes:

<< Sounds like you have a bad ground somewhere that is common to both the VM
 and landing lights.  I'm assuming all other electronics function normally
 when the lights are on.
 
 Get your volt meter out and start tracing it down. >>

Jim,

Thanks for the response.

However, could you please elaborate a little bit more?  Exactly want should I 
be tracing down?    When you say 'bad ground', does this mean I MAY have a 
loose connection somewhere and turning the lights on drains the current from 
that  bad connection?

Thanks again.
Rick   
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>