Return-Path: Received: from sphmgaab.compuserve.com ([149.174.177.151]) by ns1.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-70783U4500L450S0V35) with ESMTP id com for ; Tue, 27 Feb 2001 09:08:44 -0500 Received: (from mailgate@localhost) by sphmgaab.compuserve.com (8.9.3/8.9.3/SUN-1.9) id JAA27216 for Lancair.list@olsusa.com; Tue, 27 Feb 2001 09:17:35 -0500 (EST) Date: Tue, 27 Feb 2001 09:17:14 -0500 From: James Frantz Subject: Lights on - VisionMicro OFF Sender: James Frantz To: Marve Kay Message-ID: <200102270917_MC2-C6F9-C646@compuserve.com> X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> >I installed Tim Ong's landing and taxi lights. Worked great and looks real niffty! However, recently, when I turn on the lights, my VisionMirco display gauges either goes completely blank or displays weird symbols.< Sounds like you have a bad ground somewhere that is common to both the VM and landing lights. I'm assuming all other electronics function normally when the lights are on. Get your volt meter out and start tracing it down. Jim Frantz >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>