From: RicArgente@cs.com
Message-ID: <d8.2dbd97e.27cc6f25@cs.com>
Date: Mon, 26 Feb 2001 21:47:01 EST
Subject: LNC2:Electrical Bugs
To: lancair.list@olsusa.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Back from AL and never did figure out why and how I was getting the unwanted 
audio transmission problem I mentioned during my last post while I was in the 
Birmingham area.  My radios/avionics seems to work fine now. Go figure...

My interior guy hurt his back but is now back in business as of today.  So, I 
had to take off the canopy and header tank again.  Now is probably a good 
time to tidy up and fix minor bugs that have materialized recently:

Prior to OSH, I installed Tim Ong's landing and taxi lights.  Worked great 
and looks real niffty!  However, recently, when I turn on the lights, my 
VisionMirco display gauges either goes completely blank or displays weird 
symbols.  I does not happen all the time but it is progressively getting 
worse.  Any ideas how I can fix this problem?  Thanks in advance.  

Lastly, I've been testing the Pilar Point fuel management system.  Trying to 
iron out the bugs and have been in constant communications with the Pillar 
Point guys.  As soon as I complete my testing, I will report on the results 
here.  So far though, it's not working as expected but it could be due to my 
installation of the IR sensors.  

Rick Argente


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>