Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Sun, 15 Sep 2013 14:33:29 -0400
Message-ID: <redirect-6476235@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=67.195.87.220; envelope-from=mcmess1919@yahoo.com
From: "Steve Colwell" <mcmess1919@yahoo.com>
References: <list-6475955@logan.com>
In-Reply-To: <list-6475955@logan.com>
Subject: LEG2 trim speed
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
thread-index: Ac6yFTCd73aTohaiQeCfkIlZ+pM+4AAGvVPA
Content-Language: en-us

The SPD-1 ... SERVO SPEED CONTROL @ $45 can be adjusted to slow pitch trim
down enough to work in both cruise and in the pattern. Roll is not
sensitive.  Rudder trim is unnecessary, save the time, weight and money.  

Steve Colwell  Legacy 


-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of
Jeffrey Skiba
Sent: Sunday, September 15, 2013 6:12 AM
To: lml@lancaironline.net
Subject: [LML] LEG2 trim speed

Okay so I am not flying yet so I ask the folks that are flying their
Legacies

If you have the ray Allen trim systems do you find that you need to have a
dual mode speed on the trim motors ?
Aka Slower speed at higher airspeeds with a faster trim motor speed flying
at lower pattern speeds ?

I am trying to decide if I want to just install now instead of later ...


Thanks in advance
Jeff.

--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html