Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Mon, 09 Sep 2013 11:07:27 -0400
Message-ID: <redirect-6460285@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=206.46.173.7; envelope-from=n5zq@verizon.net
From: "Bill Harrelson" <n5zq@verizon.net>
References: <list-6459891@logan.com>
In-reply-to: <list-6459891@logan.com>
Subject: Re: [LML] Teardown and check TSIO550?
MIME-version: 1.0
Content-type: text/plain; format=flowed; charset=iso-8859-1; reply-type=original
Content-transfer-encoding: 7bit
Importance: Normal

Robert,

There are really only a few really top notch engine shops in the country. 
From that small pool I would recommend Barrett in Tulsa. They have a great 
deal of experience working on Performance Engines 550s.  I can send you a 
photo of the red tagged oil pump housing that Barrett found in my new 
Performance Engine.  Consider removing the engine and shipping it rather 
than ferrying.

Bill Harrelson
N5ZQ 320 2,150 hrs
N6ZQ  IV  350 hrs


-----Original Message----- 

My engine started to run rough on climb out, cleared up, and ran rough 
again.
All the inflight temps and flows were completely in line with previous 
flights.
Ran a new conditional and found nothing amiss.  Compressions good, plugs 
clean, oil filter had no metallic.
Ferried it to Kelly Aerospace for work on the A/C and de-ice (mice in the 
wing!) and the 45 minute flight was uneventful.
However when Kelly flight tested the plane it seemed sluggish and it ran 
rough again.

Thinking about a tear down and inspection but not expecting a complete 
rebuild.
Anyone recommended who could be within 1 hr or so of central Ohio?

Robert Simon
ES-P N301ES
(375 hrs on Performance Engine TSIO550)