Mailing List lml@lancaironline.net Message #63661
From: Kent <kent@tulsaconnect.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Cold air induction for IO320?
Date: Wed, 02 Jan 2013 08:11:20 -0500
To: <lml@lancaironline.net>
Fwiw
Monty Barret developed a cold air induction for Lyc 540s.
Very popular with the Aerbatic guys.
 
Kent Felkins
Tulsa
 
Sent: Tuesday, January 01, 2013 20:42 PM
Subject: [LML] Cold air induction for IO320?
 
I have the Superior cold air induction sump on my engine.  I converted from the original Ryton sump that Superior no longer sells.  Some of the cool things about their part:
 
Much more direct intake tubes, this saves a lot of cowling space.
Oil screen is installed at a bit of an angle, thus little to no mess when you remove it to check for metal.
A center and aft port for your sniffle valve, so if your tail low the aft port drains more fuel.
It does have ports for inverted oil systems, if you were so inclined.
 
This shows the old plastic sump being replaced with the Superior sump, from a few years ago.
 
Tom McNerney
Unleashed Lancair 360
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster