X-Virus-Scanned: clean according to Sophos on Logan.com
Return-Path: <marv@lancaironline.net>
Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Mon, 11 Jun 2012 10:01:42 -0400
Message-ID: <redirect-5592757@logan.com>
X-Original-Return-Path: <hackmo15@gmail.com>
Received: from mail-pz0-f52.google.com ([209.85.210.52] verified)
  by logan.com (CommuniGate Pro SMTP 5.4.5)
  with ESMTPS id 5592729 for lml@lancaironline.net; Mon, 11 Jun 2012 09:45:26 -0400
Received-SPF: pass
 receiver=logan.com; client-ip=209.85.210.52; envelope-from=hackmo15@gmail.com
Received: by dano14 with SMTP id o14so5239528dan.25
        for <lml@lancaironline.net>; Mon, 11 Jun 2012 06:44:49 -0700 (PDT)
MIME-Version: 1.0
Received: by 10.68.189.65 with SMTP id gg1mr27030011pbc.10.1339422289790; Mon,
 11 Jun 2012 06:44:49 -0700 (PDT)
Received: by 10.68.31.232 with HTTP; Mon, 11 Jun 2012 06:44:49 -0700 (PDT)
X-Original-Date: Mon, 11 Jun 2012 06:44:49 -0700
X-Original-Message-ID: <CAEFKvnyFxRGiH4ECk1=dzBWL8Kwv2+FaRk=2Q_0xGHqGabV24g@mail.gmail.com>
Subject: vm 1000 fuel flo x ducer
From: jon hadlich <hackmo15@gmail.com>
X-Original-To: lml@lancaironline.net
Content-Type: multipart/alternative; boundary=e89a8ff1cae0c985e504c2328da4

--e89a8ff1cae0c985e504c2328da4
Content-Type: text/plain; charset=ISO-8859-1

Don't forget that the fuel flo xducer has a sensor count specific to that
unit and will vary between units. The K factor must be entered into any
engine monitor to account for this variance. Most have a place to enter the
K factor, but I think you either need a range of K factor or have it burnt
to the eeprom for the VM 1000.
Good luck.

-- 
Jon Hadlich
AI Systems
(541) 815-7381

--e89a8ff1cae0c985e504c2328da4
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Don&#39;t forget that the fuel flo xducer has a sensor count specific to th=
at unit and will vary between units. The K factor must be entered into any =
engine monitor to account for this variance. Most have a place to enter the=
 K factor, but I think you either need a range of K factor or have it burnt=
 to the eeprom for the VM 1000.<br>
Good luck.<br clear=3D"all"><br>-- <br>Jon Hadlich<br>AI Systems<br>(541) 8=
15-7381<br>

--e89a8ff1cae0c985e504c2328da4--