Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Sun, 13 May 2012 18:51:25 -0400
Message-ID: <redirect-5540762@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=64.12.78.142; envelope-from=vtailjeff@aol.com
References: <list-5534445@logan.com>
In-Reply-To: <list-5534445@logan.com>
Mime-Version: 1.0 (iPad Mail 8L1)
Content-Type: text/plain;
	charset=us-ascii
Content-Transfer-Encoding: quoted-printable
From: vtailjeff@aol.com
Subject: Re: [LML] Re: IV-P Aft Seat Pan
X-AOL-SCOLL-URL_COUNT: 0  
x-aol-sid: 3039ac1d29034faea4561d37
X-AOL-IP: 63.165.88.250

Use Chemseal from Aircraft Spruce to make a formed in place pressure seal un=
der the edge of the bucket. Much better than silicone.

Jeff

Sent from my iPad

On May 12, 2012, at 12:14 PM, Colyn Case <colyncase@earthlink.net> wrote:

> Giff,
>=20
> A popular mod is to secure the prepreg cover to the LG box permanently, an=
d cut a couple inserts for actuator inspection.
> These are much more easily sealed.
>=20
> Colyn
>=20
>=20
>=20
> On May 11, 2012, at 2:31 PM, Giffen Marr wrote:
>=20
> Considering that you have to remove the aft seat pan to do the condition i=
nspection, what have you done to provide the pressure sealing of the pan to t=
he LG Box?
>=20
> Giff Marr
> LIV-P N229GM
> --
> For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.htm=
l
>=20
>=20
> --
> For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.htm=
l