X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Mon, 15 Aug 2011 15:24:37 -0400 Message-ID: X-Original-Return-Path: Received: from [69.84.129.242] (HELO asp.reflexion.net) by logan.com (CommuniGate Pro SMTP 5.4.1) with ESMTPS id 5092987 for lml@lancaironline.net; Mon, 15 Aug 2011 15:16:21 -0400 Received-SPF: none receiver=logan.com; client-ip=69.84.129.242; envelope-from=cberland@systems3.net Received: (qmail 16479 invoked from network); 15 Aug 2011 19:15:44 -0000 Received: from unknown (HELO mail-cs-02.app.dca.reflexion.local) (10.81.19.2) by 0 (rfx-qmail) with SMTP; 15 Aug 2011 19:15:44 -0000 Received: by mail-cs-02.app.dca.reflexion.local (Reflexion email security v6.50.3) with SMTP; Mon, 15 Aug 2011 15:15:44 -0400 (EDT) Received: (qmail 13502 invoked from network); 15 Aug 2011 19:15:44 -0000 Received: from unknown (HELO remote.systems3.net) (98.172.79.178) by 0 (rfx-qmail) with (AES128-SHA encrypted) SMTP; 15 Aug 2011 19:15:44 -0000 Received: from S3SBS08SERVER.Systems3.local ([fe80::6077:364b:fa39:c71b]) by S3SBS08SERVER.Systems3.local ([fe80::6077:364b:fa39:c71b%10]) with mapi; Mon, 15 Aug 2011 12:14:18 -0700 From: Craig Berland. X-Original-To: Lancair Mailing List X-Original-Date: Mon, 15 Aug 2011 12:14:16 -0700 Subject: [LML] Re: Hot starts Thread-Topic: [LML] Re: Hot starts Thread-Index: AcxbffYjv/DX14GmRgSxEK0tq/Aa4QAAPciA X-Original-Message-ID: References: In-Reply-To: Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: acceptlanguage: en-US Content-Type: multipart/alternative; boundary="_000_D7A6B5700A0803448C27264F1F5387364E90CB7EBAS3SBS08SERVER_" MIME-Version: 1.0 --_000_D7A6B5700A0803448C27264F1F5387364E90CB7EBAS3SBS08SERVER_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Caution.....Caution. This will NOT work on late model engines. I am not s= ure when Continental changed the pump design but I know that pumps produced= after 2004 are a problem. If you use this method.....make sure that you = don't have fuel flow while in idle cutoff. The later pumps WILL flow fuel t= o the engine while in idle cutoff. Craig Berland Don has it correct. The big bore continentals will bypass fuel in this se= tup and circulate fuel through most of the hot lines. I sometimes let mine= run 1 minute or more before a hot hot start and 30 seconds on a hot start.= There should be no fuel measured in the fuel flow meters in this conditi= on. There should be no fuel pumping out on the ground in this setup. = It just circulates through the pump and back into the tank. This works fo= r TSIO and IO and it supported by TCM as one of the ways of dealing with ho= t starts. Paul Legacy Calgary On 2011-08-15, at 10:23 AM, don Grabiel wrote: Ronald, I don't know about hot starting in a tsio-550, but in my io- 550, m= ixture idle cut off, full throttle for 20 sec., then normal starting proced= ure works every time. Don G. --_000_D7A6B5700A0803448C27264F1F5387364E90CB7EBAS3SBS08SERVER_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable
<= p class=3DMsoNormal>Caution…..Caution.  Thi= s will NOT work on late model engines.  I am not sure when Continental= changed the pump design but I know that pumps produced after 2004 are a pr= oblem.  If you use this method…..make sure that  you don= 217;t have fuel flow while in idle cutoff. The later pumps WILL flow fuel t= o the engine while in idle cutoff.

Craig Berland

 

Don has it correct.   The b= ig bore continentals will bypass fuel in this setup and circulate fuel thro= ugh most of the hot lines.  I sometimes let mine run 1 minute or more = before a hot hot start and 30 seconds on a hot start.   There should b= e no fuel measured in the fuel flow meters in this condition.    = There should be no fuel pumping out on the ground in this setup.   &n= bsp;It just circulates through the pump and back into the tank.  This = works for TSIO and IO and it supported by TCM as one of the ways of dealing= with hot starts.

 =

Paul

Legacy

Calgary

On 2011-08-15, at 10:23 AM, don= Grabiel wrote:



Ronald, I don't know about hot starting in a tsio-550, but in my io= - 550, mixture idle cut off, full throttle for 20 sec., then normal startin= g procedure works every time.  Don G.

= = --_000_D7A6B5700A0803448C27264F1F5387364E90CB7EBAS3SBS08SERVER_--