Posted for "Jim Nordin" <panelmaker@earthlink.net>:

 My concern is the fact it is a polyester resin. I seem to remember something
 about mixing polyester with Jeffco or polyester not adhering to Jeffco well.
 Might have remembered wrongly.
 
 Anybody?
 Jim
 
 
 
  _____  
 
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of
 mikeeasley
 Sent: Saturday, March 13, 2010 8:02 AM
 To: lml@lancaironline.net
 Subject: [LML] Re: Filler
 
 
 
 Jim,
 
 
 
 The Evercoat Metal Glaze seems to have some metal anticorrosion additives
 that shouldn't be necessary on our plastic airplanes.  I used a similar
 product called Piranha Putty from 3M for some small touch-up areas.  The
 primer was my first line of defense against the dreaded pinhole.
 
 
 
 Mike Easley
 
 Colorado Springs
 
 
 
 
 
 
 
 In a message dated 03/12/10 19:38:37 Mountain Standard Time,
 panelmaker@earthlink.net writes:
 
 This has been discussed before but I want to make sure I'm not going to be
 sorry for using Evercoat metal glaze to solve the pinhole problem. Any
 experience out there with  this stuff?
 
 
 
 It is POLYESTER finishing and blending putty. Boy does it work good on a
 sample. NO PINHOLES !
 
 
 Jim