Return-Path: <lancair.list-request@olsusa.com>
Received: from mail.cpro.co.za ([196.37.249.19]) by ns1.olsusa.com
          (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35)
          with ESMTP id com for <lancair.list@olsusa.com>;
          Sun, 23 Apr 2000 13:18:21 -0400
Received: from default ([196.33.193.90]) by mail.cpro.co.za
          (Netscape Messaging Server 3.5)  with SMTP id 82
          for <lancair.list@olsusa.com>; Sun, 23 Apr 2000 19:37:10 +0200
Message-ID: <000701bfad49$a08a4fa0$5ac121c4@default>
Reply-To: "Pine Pienaar" <pine@cpro.co.za>
From: "Pine Pienaar" <Pine@CPro.co.za>
To: "LancairList" <lancair.list@olsusa.com>
Subject: Hydraulic fittings
Date: Sun, 23 Apr 2000 19:30:30 +0200
X-Mailing-List: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Hi

Can anyone tell me how to stop a screw-in hydraulic fitting in the right
place, and still make it seal??

I don't think you are supposed to use a teflon type tape.

Many Thanks

Pine Pienaar
pine@cpro.co.za
Lancair 360 #664


[I went to the local hydraulic shop (there are Caterpillar dealers near
just about everywhere) and purchased some of their pipe thread sealant
that is designed specifically for use on NPT threads in hydraulic
applications.  Remember that the rule is thread sealant compound on
NPT fittings but nothing on flare fittings.  BTW, be sure to verify that
the sealant compound you purchase is approved for use with AL fittings
as well as steel.  There are some out there that are not compatible with
both materials.     <Marv>     ]




>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>