Return-Path: Received: from marvkaye.olsusa.com ([207.30.195.128]) by ns1.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35) with SMTP id com for ; Fri, 7 Apr 2000 07:23:02 -0400 Message-Id: <3.0.3.32.20000407072018.03009270@olsusa.com> Date: Fri, 07 Apr 2000 07:20:18 -0400 To: lancair.list@olsusa.com From: Marvin Kaye Subject: Building the aileron idler arms X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Posted for "Claudio Garcias" : Hi Lancair builders, I finally started on my 360. Although I purchased the $695 bracket kit, the aileron idler arm brackets and the plate aileron outboard control horn (AL8) came on an aluminum plate where they are traced with a maker, the two small 3/8"R holes tapped, and the .755 dia hole drilled and chamfered. I made the idler arm brackets without using any power tools and they came out almost perfect per the drawing. My concern is that the .755"diam. hole seems to be too big for the bellcrank bearing retainer to be a perfect fit. There is, at least, 3/32nds of a gap which makes it harder to center. Is this right? The drawing calls for part #BC4W and the only thing I found are the BC4W-10A. Also, once they are completed I'd like to send them to be polished and anodized. Does anybody know where I can have this done? Thanks Claudio >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>