X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Wed, 16 Apr 2008 14:23:01 -0400 Message-ID: X-Original-Return-Path: Received: from web36901.mail.mud.yahoo.com ([209.191.85.69] verified) by logan.com (CommuniGate Pro SMTP 5.2.1) with SMTP id 2849672 for lml@lancaironline.net; Tue, 15 Apr 2008 21:03:21 -0400 Received: (qmail 58589 invoked by uid 60001); 16 Apr 2008 01:03:15 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:MIME-Version:Content-Type:Message-ID; b=uSg0k8xzhpugTjoB2Ufb6DfGWTyxiBTEz+6X9L8Y7JYCQrb9vQaUQpGu9Pfl07SUKTEC1q0BkLwfuQZ0HpNvyhsDFPDLg8RSBBnzcKrsYNnXfbUtf0Nua4JMlDsLbD9mhX6GObkNUE96CkKHjYb1wEepPePJuf+faqXzxdLFPCA=; X-YMail-OSG: rh7p7SIVM1niyI5dTON.7IcXlkV9LCQG9e2mjrp9t68XkluPesLd18Pvyc3bazBzjdoWK1HEpFddUWRz31iah3ewd7s- Received: from [209.225.224.254] by web36901.mail.mud.yahoo.com via HTTP; Tue, 15 Apr 2008 18:03:15 PDT X-Mailer: YahooMailRC/902.40 YahooMailWebService/0.7.185 X-Original-Date: Tue, 15 Apr 2008 18:03:15 -0700 (PDT) From: Chris Zavatson Subject: Re: [LML] Two speed, Ray Allen trims X-Original-To: Lancair Mailing List MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="0-1171902751-1208307795=:58249" X-Original-Message-ID: <428988.58249.qm@web36901.mail.mud.yahoo.com> --0-1171902751-1208307795=:58249 Content-Type: text/plain; charset=us-ascii Jeff, I made a high/low rate speed control that cost me about $4. First I tested the servo and found that 5V was about the right voltage level for low rate travel. I built a harness that goes in between the trim switch and the servo. A smal toggle switch on the panel allows me to select full bus voltage for high rate or 5V off an in-line voltage regulator for low rate. It has worked great for ten years now. I can draw up a sketch if needed. Chris Chris Zavatson N91CZ L360std www.N91CZ.com ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ --0-1171902751-1208307795=:58249 Content-Type: text/html; charset=us-ascii

Jeff,

I made a high/low rate speed control that cost me about $4. First I tested the servo and found that 5V was about the right voltage level for low rate travel. I built a harness that goes in between the trim switch and the servo. A smal toggle switch on the panel allows me to select full bus voltage for high rate or 5V off an in-line voltage regulator for low rate. It has worked great for ten years now. I can draw up a sketch if needed.

Chris

Chris Zavatson

N91CZ

L360std

www.N91CZ.com

between 0000-00-00 and 9999-99-99 --0-1171902751-1208307795=:58249--