Mailing List lml@lancaironline.net Message #46863
From: Mark Steitle <msteitle@gmail.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Two speed, Ray Allen trims
Date: Tue, 15 Apr 2008 19:38:10 -0400
To: <lml@lancaironline.net>
 Message Header

Undecoded Message
Jeff,
I used a number of the 12v 5A DC Motor Speed Controll kits available from MPJA.com for $15.99/ea.  You can mount the board and rheostat separately if necessary.  This gives you infinite controllability of any DC motor.  They even work as a cabin light dimmer on LEDs.  Hard to beat the price.

Mark S.  

On Tue, Apr 15, 2008 at 3:44 PM, Jeffrey W. Skiba <jskiba@icosa.net> wrote:

ALL,

 

I am looking for a simple way to reduce the speed of my Ray Allen Trim servos.

What I need to know is the best way to Slow the speed of the servos down. I have seen the ray Allen servo speed controller however I would need 2 of them at $45 each seems a bit pricey, and I was hoping the group has a cost effective solution.

 

Could one just use a resistor ? I am guessing the Ray Allen controller is a PWM maybe some one knows of a cheaper version ?

 

Any direction would be appreciated

Jeff.


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster