Better than my ASCII art - see Lancair service bulletin 54:
http://www.lancair.com/Main/service_bulletins/SB054.pdf


> Two things to check:
> 1) I would expect the steel landing gear weldment (GM1?) to bend before
> the aluminum forging. Check for any bending of the weldment by laying
> a straightedge against the top of the steel tube inside the wing.
> I'll try an ASCII drawing... Look for bends at the asterisks (*)
>
>   *       *
> ===============
>     \\   ||
>      \\  ||
>       \\ ||
>        \\||
>         \||
>          ||
>          ||