From: "Marvin Kaye" <marv@lancaironline.net>
Subject: Re: [LML] Looking for a Reichel trim system
To: lml
Date: Wed, 20 Dec 2006 04:15:27 -0500
Message-ID: <web-1693666@logan.com>
In-Reply-To: <4588B89B.5080402@britevalley.com>
References: <list-1692814@logan.com>
 <4588B89B.5080402@britevalley.com>
MIME-Version: 1.0
Content-Type: text/plain;charset="iso-8859-1";format="flowed"
Content-Transfer-Encoding: 8bit

Posted for Paul Nafziger <naf@britevalley.com>:

  Unfortunately, Dick was killed in his Lancair 360 last year and no one is
currently building them.  Perhaps I should check with Linda to carry on the
tradition, as Dick did for his friend who passed on.  Failing that, you'll
have to find a used or unused one.
  
  Naf
  
LenS790501@aol.com wrote:
>
>  Does anyone have or know where I can purchase one of Dick Reichel's 
> geared
>  elevator trim kits?
>  Thanks,
>  Len Spina
>  N15EG

[If someone has one of Dick's kits waiting to be installed they would be 
willing
to let me use for as long as it takes to dimension the components I would be
honored to attempt to follow in Dick's footsteps and make these available for
anyone who wants one.  I have the machining equipment at hand and am actively
looking for some projects to fill in some unwelcome free time.  Barring the
possibility of someone providing me a complete unit that I could reverse 
engineer,
a set of rough drawings or better, high-rez digital photos of all the 
components
in an exploded state with a reference for size (like a quarter in each 
picture)
would allow me to get it all specified and into production.  Any takers? 
<marv> ]