Kevin,

Absorbent CF in the vicinity of hydraulic lines and fittings could be
weakened by leaking hydraulic fluid.  Therefore, the CF in those areas
should be sealed as a preventive measure.  If it can happen it will, sooner
or later.

Rod

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net]On Behalf Of
Kevin Kossi
Sent: Saturday, August 26, 2006 7:49 AM
To: Lancair Mailing List
Subject: [LML] Inside Primer/Coating



Is there any reason to coat or prime the inside areas of the plane. I
am ready to start installing the lines?

I plan to coat the wheel wells with tank sealer, but the rest seams
like a waste of added weight.



Kevin
Legacy


--
For archives and unsub http://mail.lancaironline.net/lists/lml/