Return-Path: Received: from marvkaye.olsusa.com ([205.245.9.105]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35) with SMTP id com for ; Fri, 9 Apr 1999 14:53:05 -0400 Message-Id: <3.0.3.32.19990409145532.008ccab0@olsusa.com> Date: Fri, 09 Apr 1999 14:55:32 -0400 To: lancair.list@olsusa.com From: Bahahud@aol.com (by way of Marvin Kaye ) Subject: Re: Bolt tolerances, fixes X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Marv: Reference perpendicular bolt holes. The cheapie way to do this is to drill a hole of the size you want in a 2x4 block on a drill press to get it straight then clamp the block on the subject to t be drilled with the hole in the block located where you want it and drill through the hole. Hank - 235/290 Working on flaps/ailerons - San Mateo, CA. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML homepage: http://www.olsusa.com/Users/Mkaye/maillist.html