|
|
Looks great, Steve. Sounds like everything is nominal on the cooling and
running without fuel {:>) Only if!
Which airport will get the honors?
Ed
Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message ----- From: "Steve Brooks" <steve@tsisp.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Sunday, May 02, 2004 2:22 PM
Subject: [FlyRotary] Closer Still
SNIP
I have a pretty good sized furnace fan that I'm going to put in front of
the
scoop a few feet, and see if I can cool it sufficiently to do some higher
RPM tuning. It is running really good up to 3500, which is as far as I
have
tuned it so far. above 3500, it feels like it's going to leap off of the
ground. I did have it to 4000 a couple of times, but I thing that I had
better do that tuning at the airport, where I have more room to get it
stopped in case the brakes don't hold it back.
Attached are some photos from today.
Steve Brooks
Cozy MKIV 13BT
----------------------------------------------------------------------------
----
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|