|
And this is the guy that sent and e mail to the
list saying MY stories might scare folks away from the rotary
{:>)
Ed
Ed Anderson RV-6A N494BW Rotary Powered Matthews, NC
----- Original Message -----
Sent: Monday, April 19, 2004 1:02
AM
Subject: [FlyRotary] Re: Engine out
Scary? Not really. I usually don't pull the throttle all the
way back until I have the runway made. This is spread out over three or
four years.
On the other hand, maybe that's why I'm uncomfortable at
the slow flight regimen - like circling Lake Parker for hours at 1200' and 115
mph (OK, OK, so I took a break for maybe 1/2 hour from the holding pattern -
flew up to Zephyr Hills and chatted with some guys
there).
Finn
David Leonard wrote:
Yeouch! Half a dozen? That is quite scary Finn. Especially on short
final! Glad you are OK.
David Leonard
The Rotary Roster:
http://members.aol.com/_ht_a/rotaryroster/index.html
-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
On
Behalf Of Finn Lassen
Sent: Sunday, April 18, 2004 8:20 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Engine out
Had my most public engine out today as my engine quit on tight turn to
final into Sun'n'Fun.
Had to be pushed the last few yards off the runway onto the taxiway by
a
couple of red-shirted controllers.
Engine started about one minute later sitting on the ground.
I'm now convinced (after about half a dozen such engine outs) that the
constant velocity Mikuni carbs ARE susceptible to icing.
It's always been after steep descents (lots of cool air), throttle all
the way back.
Finn
Homepage: http://www.flyrotary.com/
Archive: http://lancaironline.net/lists/flyrotary/List.html
Homepage: http://www.flyrotary.com/
Archive: http://lancaironline.net/lists/flyrotary/List.html
|