Return-Path: Received: from [206.228.212.23] (HELO mail.statesville.net) by logan.com (CommuniGate Pro SMTP 4.2b1) with ESMTP id 3151669 for flyrotary@lancaironline.net; Wed, 07 Apr 2004 20:32:41 -0400 Received: from TWJames [63.162.171.178] by mail.statesville.net (SMTPD32-8.10) id AE6147A00D6; Wed, 07 Apr 2004 20:35:45 -0400 From: "Tommy James" To: "Rotary motors in aircraft" Subject: RE: [FlyRotary] coil failure Date: Wed, 7 Apr 2004 20:32:41 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Importance: Normal In-Reply-To: X-RBL-Warning: REVDNS: This E-mail was sent from a MUA/MTA 63.162.171.178 with no reverse DNS entry. X-Declude-Sender: twjames@statesville.net [63.162.171.178] X-Note: Scanned for Spam Thanks, Ken. I'm using the Mil Spec resistor recommended by Tracy. I just metered it at .6 ohms and I think 25 watts. The stock resistor, in my hand, say .35ohms and 5watts. Dis ain't the problem..:-) TJ -----Original Message----- From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On Behalf Of kenpowell@comcast.net Sent: Wednesday, April 07, 2004 7:18 PM To: Rotary motors in aircraft Subject: [FlyRotary] coil failure Tommy, Just a thought - are you using the Mazda coils? If so, have you replaced the stock resistor with a .3 ohm / 25 watt resistor (did I get that right guys???)? Ken Powell >> Homepage: http://www.flyrotary.com/ >> Archive: http://lancaironline.net/lists/flyrotary/List.html --- [Pre-scanned for viruses by Internet America.] --- [Pre-scanned for viruses by Internet America.]