|
|
Strange looking. Can't see if the damage extends to innards of the relay. Could be just a soldering iron having brushed over the relay enclosure. I'd be more interested in copper traces on the PCB to the relay. Corrosion? Typically the copper traces are covered by a protective film except where components are soldered to them. You could try to clean the area with alcohol and inspect closely.
But, yes, could be the problem. I think those relays are for the injectors.
Finn
On 1/19/2026 10:54 AM, DOUGLAS LOMHEIM dlomheim@aol.com wrote:
I swapped the A to B on my Renesis EC-2, and still no luck on starting, and now it wouldn’t start on either side. Pulled the board out to swap back and got a light to check solder joints for possible cracks and found this relay with a chunk of plastic missing which doesn’t look normal to my untrained eyes. Could this possibly cause my issue? I assume a relay of done type is used to switch from A to B and back…? Thx
Doug
Sent from my iPhone
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|