|
|
Hi Finn
Sorry, I misunderstood. Too many things on my mind at work at present.
When I get to the EC3 mods I’ll:
a. Test the EC3 with new clamped CAS input. If no change and it still runs like a dog on two legs -
b. I’ll reprogram the chips with your hex code and retest.
On another note:
Still trying to decide on whether to pay to have my 4 blue secondary injectors cleaned and tested or
buy new injectors, New ones are cheaper on eBay but are they knock offs that I shouldn’t trust?
Cleaning is $40 each. New ones are $20 each!
Cheers
Steve Izett
On 24 Jun 2020, at 12:04 am, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:
Oh, you already reprogrammed them with the fixed code I uploaded?
Finn
On 6/23/2020 10:44 AM, Stephen Izett stephen.izett@gmail.com wrote:
Thanks Finn.
I’ll add the 2 zeners to the EC3 and test it.
I thought the reprogramming of the chips was right.
MPLABS reported them to be good.
Steve
On 23 Jun 2020, at 9:56 pm, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:
Attached is an excerpt of the EC3 CAS input conditioning circuit without added clamping circuit and with.
Finn
On 6/22/2020 10:02 PM, Stephen Izett stephen.izett@gmail.com wrote:
Thanks Finn. Did you previously give us a the circuit? Do you have a sketch of it?
I’ll mod the EC3 and see if that is the problem.
Cheers
Steve Izett
<EC3 CAS input with clamp.pdf><EC3 CAS input.pdf>--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|