On May 23, 2020, at 11:30 AM, A R Goldman argoldman@aol.com <flyrotary@lancaironline.net> wrote:

Greetings all

Anybody know the total current draw for Tracy’s EC-3 including efi,injectors, pump, etc at about 7-8 k. Rpm?

Thanks

Rich

Sent from my iPhone

On May 21, 2020, at 8:16 PM, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:

Well, after several hours of Murphy working overtime, I finally was able to get the wiring on my EC3 chip programming board right, chips programmed and EC3 installed.

Flux capacitor fluxing, injectors clicking and spark plug firing.

Time to get the wheels on and roll it out and start the engine.

Oh, wait, guess I need to finish and install the prop :(

Finn

On 5/21/2020 9:23 AM, Finn Lassen finn.lassen@verizon.net wrote:
1) Without prop any vibration will be from engine and PSRU and can inspect engine (leaks, etc.) with no fear of prop.

2) With prop less chance of over rev and some cooling air through rads and oil cooler.

What do you think?

Finn



-- Homepage:  http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html