|
|
Great work Finn
Could I get the MPLABs version your using and any more info for the build.
I could build and program and confirm the burn but the EC3 ran like a dog.
Steve
On 22 May 2020, at 9:16 am, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:
Well, after several hours of Murphy working overtime, I finally was able to get the wiring on my EC3 chip programming board right, chips programmed and EC3 installed.
Flux capacitor fluxing, injectors clicking and spark plug firing.
Time to get the wheels on and roll it out and start the engine.
Oh, wait, guess I need to finish and install the prop :(
Finn
On 5/21/2020 9:23 AM, Finn Lassen finn.lassen@verizon.net wrote:
1) Without prop any vibration will be from engine and PSRU and can inspect engine (leaks, etc.) with no fear of prop.
2) With prop less chance of over rev and some cooling air through rads and oil cooler.
What do you think?
Finn
-- Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|